FRN0013C2S-4SL1 Fuji Mini Solar 5.5 KW 5 hp 440V

Price 26000.0 INR/ Number

Get a Price/Quote

MOQ : 1 Number

FRN0013C2S-4SL1 Fuji Mini Solar 5.5 KW 5 hp 440V Trade Information

Minimum Order Quantity
1 Number

Delivery Time
24 Hours

About FRN0013C2S-4SL1 Fuji Mini Solar 5.5 KW 5 hp 440V

The

FRN0013C2S-4SL1

is a 5.5 kW (7.5 HP) Solar Water Pump VFD from Fuji Electric's FRENIC-Mini (C2) series. It uses a slightly larger chassis than the 5 HP solar model to handle higher current demands while maintaining a compact footprint.

Manufacturer:	Fuji Electric
Series:	Frenic Mini (FRN-C2)
Model:	FRN0013C2S-4E
Application:	pumps / fans / general purpose
Capacity, kW:	5.5
Current, :	13
Main power supply, V:	380-480
Phase:	3
Output frequency, Hz:	25-400
Enclosure:	IP 20
Overload capacity, % per 1 min.:	150
Acceleration time, sec:	0-3600
Deceleration time, sec:	0-3600
EMC filter:	-
Braking unit:	+
Analog input:	2
Digital input:	5
Analog output:	1
Digital output:	1
Relay output:	3
RS485 (Modbus RTU):	RS485, Modbus
Starting torque:	150%
PID:	PID - regulation
V/f control mode:	+
Vector control with feedback:	+
Sensorless vector control:	+
Operation temperature, :	-10.....+50
Storage temperature, :	-25......+70
Dimensions (W x H x D), mm:	180x220x158
Weight, kg:	3,1

Physical Dimensions (Inches)

This model is built on Frame 3 or 4 of the Mini series, with the following approximate dimensions:

Dimension	Metric Value	Imperial (Inches)
Height	220 mm	8.66 inches
Width	180 mm	7.09 inches
Depth (Length)	158 mm	6.22 inches
Net Weight	3.1 kg	6.8 lbs

Primary Solar Functions

Solar Optimization (MPPT): The drive's core function is Maximum Power Point Tracking, which continuously calculates the best speed for the pump based on the sunlight intensity provided by your PV array.
Off-Grid Autonomy: It is designed to work without grid power or batteries, starting automatically at sunrise once the DC voltage reaches the threshold and stopping at sunset.
Dry Run Protection: To prevent motor burnout, it automatically stops the pump if the water level in the source (well or bore) becomes too low.
Dual Power Input: While optimized for high-voltage DC from solar panels (up to 800V DC), it can also be connected to a standard 3-phase AC power source.

Electrical Ratings

Motor Capacity: 5.5 kW / 7.5 HP.
Rated Output Current: 13.0 Amps.
Overload Performance: Can handle 150% current for 1 minute and up to 200% for 0.5 seconds, providing the extra torque needed to start heavy water loads.

Dedicated Solar Logic

True MPPT (Maximum Power Point Tracking): The drives primary "brain" function. It continuously monitors the solar panel's output and adjusts the pump's speed (frequency) in real-time to match the available sunlight. This ensures the pump keeps running even during light cloud cover.
Autonomous Operation: It manages the entire start/stop cycle. It "wakes up" the pump at sunrise when PV voltage reaches the required threshold and performs a soft-stop at sunset.
Deliverance Logic: This unique function estimates available PV power before starting the motor to prevent unnecessary "hunting" or short-cycling during low-light conditions (like early morning).

Pump Protection Functions

Dry Run Detection: If the water source (borewell or tank) runs dry, the drive senses the drop in motor torque and shuts down immediately to prevent damage to the pump's mechanical seals.
Tank Level Management: Includes digital inputs for float switches, allowing the drive to automatically stop pumping once a storage tank is full.
Dynamic Torque Vector Control: Delivers high torque (up to 150%) at very low speeds, which is essential for pushing water up through long pipes or deep wells during the initial start-up.

Core Industrial Capabilities

PID Control: Allows the drive to maintain a constant pressure or flow rate without needing an external PLC.
Safety & Alarms: Equipped with full protection for overvoltage, undervoltage, short circuits, and motor overheating.
Dual-Input Ready: While built for high-voltage DC solar arrays (up to 800V DC), it can also accept a standard 3-phase 380V-480V AC backup supply if needed.