FRN0024C2S-4A - Fuji Mini 11 KW 15 hp 440V

Price 28600.0 INR/ Number

Get a Price/Quote

MOQ : 1 Number

FRN0024C2S-4A - Fuji Mini 11 KW 15 hp 440V Trade Information

Minimum Order Quantity
1 Number

Delivery Time
24 Hours

About FRN0024C2S-4A - Fuji Mini 11 KW 15 hp 440V

The

Fuji Electric FRN0024C2S-4A

is an 11 kW (15 HP) Variable Frequency Drive (VFD) from the high-performance FRENIC-Mini (C2) series. This model is designed for 3-phase 400V power systems and provides a rated output current of 24.0 Amps.

Manufacturer:	Fuji Electric
Series:	Frenic Mini (FRN-C2)
Model:	FRN0024C2S-4E
Application:	pumps / fans / general purpose
Capacity, kW:	11
Current, :	24
Main power supply, V:	380-480
Phase:	3
Output frequency, Hz:	25-400
Enclosure:	IP 20
Overload capacity, % per 1 min.:	150
Acceleration time, sec:	0-3600
Deceleration time, sec:	0-3600
EMC filter:	-
Braking unit:	+
Analog input:	2
Digital input:	5
Analog output:	1
Digital output:	1
Relay output:	3
RS485 (Modbus RTU):	RS485, Modbus
Starting torque:	150%
PID:	PID - regulation
V/f control mode:	+
Vector control with feedback:	+
Sensorless vector control:	+
Operation temperature, :	-10.....+50
Storage temperature, :	-25......+70
Dimensions (W x H x D), mm:	220x260x190
Weight, kg:	4,5

Feature	Specification
Applicable Motor	11 kW (15 HP)
Rated Output Current	24.0 A
Input Voltage	3-Phase 380V to 480V AC (+10%, -15%)
Overload Capacity	150% for 1 minute; 200% for 0.5 seconds
Efficiency	Approximately 96.8%

Measurement	Metric	Imperial (Inches/Lbs)
Width	220 mm	8.66 in
Height	260 mm	10.24 in
Depth (Length)	190 mm	7.48 in
Weight	4.5 kg	9.92 lbs

The Fuji Electric FRN0024C2S-4A (FRENIC-Mini C2) is a high-capacity 15 HP drive. Handling 24.0 Amps, it is designed for heavy industrial machinery where reliable power, high starting torque, and advanced motor protection are non-negotiable.

Primary Control Functions

Massive Starting Torque: Uses Dynamic Torque Vector Control to provide 200% torque at 0.5Hz. This ensures that heavy 15 HP loadslike large stone crushers, industrial mixers, or fully loaded uphill conveyorsstart smoothly without tripping the drive.
Dual Motor Support: It can control both standard Induction Motors and high-efficiency Permanent Magnet (PM) Synchronous Motors. This allows you to upgrade your plant's efficiency without needing to change your drive hardware.
Internal Braking Chopper: Comes standard with a built-in braking transistor. For 15 HP high-inertia loads (like large industrial blowers or centrifuges), this allows for rapid stopping by adding an external braking resistor.

Operational Capabilities

Intelligent PID Control: Features a built-in PID regulator with "Sleep" and "Wake-up" modes. It is ideal for large-scale pumping or ventilation systems, where the drive automatically stops when pressure is met and restarts when demand returns.
Soft Start/Stop (S-Curve): You can program custom acceleration and deceleration ramps to prevent mechanical "snap" on heavy gears and belts, significantly extending the life of your 15 HP mechanical system.
8-Step Multi-Speed: Allows for the programming of up to 8 different speeds that can be triggered by external sensors or a PLC for automated production sequences.
Energy Optimization: The drive calculates the most efficient magnetic flux for the motor in real-time, reducing electricity consumption during partial-load periods.

Safety & Maintenance

Predictive Life Diagnostics: The drive monitors its own internal health. It tracks the wear on the cooling fans and DC bus capacitors, giving you a warning signal when they reach 90% of their expected 10-year lifespan.
Robust Motor Protection: Features an electronic thermal relay specifically calibrated for 11kW motors to prevent winding burnout without needing external thermal relays.
Detailed Trip Logging: Records the exact conditions (Current, Voltage, Frequency) of the last several faults, helping maintenance teams quickly determine if a problem is mechanical (like a jam) or electrical (like a surge).

Interface & Connectivity

Built-in Potentiometer: Features a physical dial on the keypad for quick, manual speed adjustments by operators.
RS-485 Modbus RTU: Built-in as standard for easy integration into factory-wide SCADA or PLC networks.
FRENIC Loader Software: Can be connected to a laptop for fast parameter editing, troubleshooting, and backup via a USB adapter.