FRN0012C2S-7A - Fuji Mini 2.2 KW 3 hp 220V

Price 22300.0 INR/ Number

Get a Price/Quote

MOQ : 1 Number

FRN0012C2S-7A - Fuji Mini 2.2 KW 3 hp 220V Specification

Humidity %
5% to 95%

Mounting Type
Panel mounting

IP Rating
20

Product Type
VFD

Power Rating
200V to 240V

Application
Industrial Machinery

Color
Blue

Usage & Applications
Industrial Machinery

Weight
2.5 Kilograms (kg)

Rated Voltage
200V to 240V Volt (V)

Warranty
1 Year

Phase
1 Phase

Input Voltage
200V to 240V Volt (V)

Rated Current
200V to 240V Volt (v)

Material
Plastic

FRN0012C2S-7A - Fuji Mini 2.2 KW 3 hp 220V Trade Information

Minimum Order Quantity
1 Number

Delivery Time
24 Hours

About FRN0012C2S-7A - Fuji Mini 2.2 KW 3 hp 220V

The

Fuji Electric FRN0012C2S-7A

is a compact variable frequency drive (VFD) from the FRENIC-Mini (C2) series designed for 2.2 kW (3 HP) motors. This single-phase 200V class drive is the most powerful unit in the C2 series discussed so far, delivering a rated output current of 11 Amps.

TypeStandard typeModelFRN0012C2S-7AVoltage200VOutput(kW)2.2Product typeMain bodyNo. of phases1 phaseProduct handling categoryCurrent productsCountries and regions covered

Global
Asia

Physical Dimensions in Inches

This high-power mini drive maintains a compact form factor for panel-mounted industrial applications.

Width: 5.51 inches (140 mm)
Height: 7.09 inches (180 mm)
Depth: 5.47 inches (139 mm)
Weight: Approximately 5.5 lbs (2.5 kg)

Key Technical Specifications

Power Output: 2.2 kW (3 HP).
Input Power: Single-phase 200V to 240V AC (+10% to -15%).
Control Method: Dynamic Torque Vector Control for high performance at low speeds (starting torque of 150% at 1 Hz).
Overload Capacity: 150% for 1 minute; up to 200% for 0.5 seconds.
Communication: Built-in RS-485 port (RJ45) supporting Modbus RTU.

The Fuji Electric FRN0012C2S-7A (FRENIC-Mini C2) functions as a high-capacity motor controller for 2.2 kW (3 HP) motors, delivering a robust 11 Amps of output current. While it is physically larger than the smaller C2 models, it provides the most powerful torque management available in the single-phase input "Mini" category.

Core Control Functions

High-Power Torque Vectoring: Uses Dynamic Torque Vector Control to provide a massive starting torque of 200% at 0.5 Hz. This allows it to easily start heavy 3 HP loads, such as large industrial mixers, stone crushers, or loaded vertical conveyors.
Variable Speed Range: Regulates speed from 0.1 to 400 Hz, allowing a 3 HP motor to run at extremely slow speeds without stalling or at very high speeds for specialized equipment.
Braking Performance: Unlike the smaller units, this 2.2 kW model is frequently used in applications requiring frequent stops. It features a built-in braking chopper (transistor), allowing for the direct connection of an external braking resistor to dissipate energy during rapid deceleration.

Advanced Intelligence

PID Control with Sleep Mode: Automatically manages pressure or flow. It includes a "sleep" function that turns the motor off completely when demand is zero (like a closed water tap) and wakes it up automatically when pressure drops.
Synchronous Motor Support: In addition to standard induction motors, the C2 series can control permanent magnet synchronous motors, which are increasingly used for high-efficiency industrial applications.
Automatic Energy Optimization: Continuously calculates the most efficient voltage/frequency ratio for the current 3 HP load, reducing wasted heat and energy costs.

Integration & Protection

Maintenance Diagnostics: The drive monitors its own health, including the "life expectancy" of the main capacitors and the cooling fan, providing a warning signal before a failure occurs.
RS-485 Networking: Supports Modbus RTU through its RJ45 port, allowing it to be linked with other drives or an HMI like the Weinview MT8052iP for a complete control system.
Safety Suite: Built-in protection against overcurrent, overvoltage, input phase loss, and motor thermal overload.

Comparison to 1.5 kW Model

The FRN0012C2S-7A provides nearly 20% more current (11A vs 9.2A) than the 1.5 kW model, making it the preferred choice for heavy-duty industrial 3 HP motors where reliable startup and thermal headroom are critical.