FRN0018C2S-4A - Fuji Mini 7.5 KW 10 hp 440V

Price 26100.0 INR/ Number

Get a Price/Quote

MOQ : 1 Number

FRN0018C2S-4A - Fuji Mini 7.5 KW 10 hp 440V Trade Information

Minimum Order Quantity
1 Number

Delivery Time
24 Hours

About FRN0018C2S-4A - Fuji Mini 7.5 KW 10 hp 440V

The

Fuji Electric FRN0018C2S-4A

is a high-performance 7.5 kW (10 HP) Variable Frequency Drive (VFD) from the FRENIC-Mini (C2) series. Designed for 400V-class three-phase power, this unit delivers a rated output current of 18.0 Amps, making it ideal for managing heavy industrial machinery.

Standard typeModelFRN0018C2S-4AVoltage400VOutput(kW)7.5Product typeMain bodyNo. of phases3 phaseProduct handling categoryCurrent productsCountries and regions covered

Global
Asia

Key Technical Specifications

Feature	Specification
Motor Capacity	7.5 kW (10 HP)
Rated Output Current	18.0 A
Input Voltage	3-Phase 380V to 480V AC
Overload Capacity	150% for 1 minute; 200% for 0.5 seconds
Efficiency	Approximately 96.8%

Dimensions & Weight (Inches)

As a 10 HP drive, it utilizes a larger frame than the smaller Mini models to ensure adequate cooling and power distribution.

Measurement	Metric	Imperial (Inches/Lbs)
Width	180 mm	7.09 in
Height	220 mm	8.66 in
Depth (Length)	158 mm	6.22 in
Weight	3.1 kg	6.8 lbs

The Fuji Electric FRN0018C2S-4A (FRENIC-Mini C2) is a high-power compact drive designed for 7.5kW (10 HP) motors. With a rated output of 18.0 Amps, it is built to handle heavy industrial machinery that requires both high torque and precise speed management.

Primary Control Functions

Maximum Heavy-Duty Torque: Uses Dynamic Torque Vector Control to deliver 150% torque at 1Hz. This is essential for 10 HP motors starting under massive loads, such as stone crushers, large mixers, or fully loaded belt conveyors.
Dual Motor Support: It can control both standard Induction Motors and high-efficiency Permanent Magnet (PM) Synchronous Motors. This allows you to upgrade your motor to a more energy-efficient model without needing to buy a new drive.
Integrated Braking Chopper: Comes with a built-in braking transistor. For 10 HP high-inertia loads (like massive industrial fans or centrifuges), this allows you to stop the motor quickly by connecting an external braking resistor.

Operational Capabilities

Advanced PID Control: Includes a built-in PID regulator with "Sleep" and "Wake-up" modes. This is perfect for 10 HP water pump systems or air compressors, where the drive automatically stops when pressure is met and restarts when demand increases.
Soft Start/Stop (S-Curve): You can program smooth "S-curve" acceleration and deceleration to prevent mechanical shock to gears, belts, and couplings, which is critical for the longevity of a 10 HP system.
8-Step Multi-Speed: Supports up to 8 pre-programmed speeds that can be triggered by external sensors or a PLC for automated production cycles.
Automatic Energy Saving: Even at this power level, the drive optimizes the motor's magnetic flux during light-load operation to minimize electricity costs.

Safety & Maintenance

Component Life Diagnostics: The drive monitors its own internal "health." It can signal a warning when the cooling fan or DC bus capacitors reach 90% of their expected 10-year lifespan, helping you avoid unexpected factory downtime.
Sophisticated Motor Protection: The electronic thermal relay is specifically calibrated for 7.5kW motors, monitoring current profiles to prevent winding burnout without needing external thermal relays.
Trip History: Records detailed logs (Amps, Volts, Frequency) of the last several faults, allowing maintenance teams to quickly diagnose if a problem was caused by a mechanical jam or a power surge.

Interface & Connectivity

Built-in Potentiometer: Features a physical dial on the keypad for intuitive, manual speed control.
RS-485 Modbus RTU: Standard communication port for connecting to HMI touchscreens, SCADA systems, or factory-wide PLC networks.
FRENIC Loader Support: Can be connected to a PC for fast parameter editing, monitoring, and backup via a USB adapter.