FRN0011C2S-4A - Fuji Mini 3.7 KW 5 hp 440V

Price 25200.0 INR/ Number

Get a Price/Quote

MOQ : 1 Number

FRN0011C2S-4A - Fuji Mini 3.7 KW 5 hp 440V Trade Information

Minimum Order Quantity
1 Number

Delivery Time
24 Hours

About FRN0011C2S-4A - Fuji Mini 3.7 KW 5 hp 440V

The

Fuji Electric FRN0011C2S-4A

is a 3.7 kW (5.0 HP) variable frequency drive from the high-performance FRENIC-Mini (C2) series. It is the most powerful model in the compact C2 frame range, designed to handle larger 3-phase industrial motors with a standard rated output of 9.0 Amps.

Manufacturer:	Fuji Electric
Series:	Frenic Mini (FRN-C2)
Model:	FRN0011C2S-4E
Application:	pumps / fans / general purpose
Capacity, kW:	4
Current, :	10.5
Main power supply, V:	380-480
Phase:	3
Output frequency, Hz:	25-400
Enclosure:	IP 20
Overload capacity, % per 1 min.:	150
Acceleration time, sec:	0-3600
Deceleration time, sec:	0-3600
EMC filter:	-
Braking unit:	+
Analog input:	2
Digital input:	5
Analog output:	1
Digital output:	1
Relay output:	3
RS485 (Modbus RTU):	RS485, Modbus
Starting torque:	150%
PID:	PID - regulation
V/f control mode:	+
Vector control with feedback:	+
Sensorless vector control:	+
Operation temperature, :	-10.....+50
Storage temperature, :	-25......+70
Dimensions (W x H x D), mm:	140x180x75
Weight, kg:	2,5

Manufacturer:	Fuji Electric
Series:	Frenic Mini (FRN-C2)
Model:	FRN0011C2S-4E
Application:	pumps / fans / general purpose
Capacity, kW:	4
Current, :	10.5
Main power supply, V:	380-480
Phase:	3
Output frequency, Hz:	25-400
Enclosure:	IP 20
Overload capacity, % per 1 min.:	150
Acceleration time, sec:	0-3600
Deceleration time, sec:	0-3600
EMC filter:	-
Braking unit:	+
Analog input:	2
Digital input:	5
Analog output:	1
Digital output:	1
Relay output:	3
RS485 (Modbus RTU):	RS485, Modbus
Starting torque:	150%
PID:	PID - regulation
V/f control mode:	+
Vector control with feedback:	+
Sensorless vector control:	+
Operation temperature, :	-10.....+50
Storage temperature, :	-25......+70
Dimensions (W x H x D), mm:	140x180x75
Weight, kg:	2,5

Physical Dimensions & Weight

This model is slightly larger than the lower-wattage units to manage the increased heat generated by a 5 HP load.

Measurement	Metric	Imperial (Inches/Lbs)
Width	140 mm	5.51 in
Height	180 mm	7.09 in
Depth (Length)	139 mm	5.47 in
Weight	1.8 kg	4.0 lbs

The Fuji Electric FRN0011C2S-4A (FRENIC-Mini C2) is a high-capacity compact drive specifically engineered to manage 3.7kW (5.0 HP) motors. Handling a rated current of 9.0 Amps, it is built for heavy-duty industrial tasks that require significant power and sophisticated motor control.

Primary Control Functions

Maximum Starting Torque: Uses Dynamic Torque Vector Control to deliver high torque even at low speeds (150% at 1Hz). This is vital for 5 HP loads that are difficult to move from a standstill, such as heavy-duty conveyors, industrial mixers, and large air compressors.
Dual Motor Compatibility: It can seamlessly control both standard Induction Motors and high-efficiency Permanent Magnet (PM) Synchronous Motors. This allows you to use the drive with the latest energy-saving motor technology.
High-Speed Braking: Includes a built-in braking transistor (chopper). For 5 HP systems with high inertia (like large industrial blowers or centrifuges), this allows you to stop the motor rapidly by adding an external braking resistor.

Operational Capabilities

Intelligent PID Control: Includes a built-in PID regulator with "Sleep" and "Wake-up" functions. This is perfect for constant-pressure water systems or ventilation, where the motor shuts off when not needed and restarts automatically when demand returns.
Customisable Acceleration/Deceleration: You can program smooth "S-curve" ramps to prevent mechanical stress, belt slippage, or "water hammer" in piping systems.
8-Step Speed Control: Allows you to pre-program up to 8 different speeds that can be activated by external sensors or a PLC for automated manufacturing cycles.
Slip Compensation: Monitors the motor's actual load and automatically adjusts the output frequency to maintain a constant RPM, even if the load changes suddenly.

Safety & Maintenance Functions

Component Life Monitor: The drive tracks its own internal "health." It can signal a warning when the cooling fan or DC bus capacitors reach 90% of their expected 10-year lifespan, preventing unexpected downtime.
Overload Protection: Features a sophisticated electronic thermal relay specifically tuned for 3.7kW motors to prevent winding damage during heavy use.
Fault Diagnostics: Stores a detailed history of the last several trip events (including Current, Voltage, and Frequency at the time of the fault) to help you quickly identify if a jam is mechanical or electrical.

Interface & Connectivity

Standard Keypad with Dial: Features an integrated potentiometer for easy manual speed adjustment and a display for monitoring live performance data.
RS-485 Modbus RTU: Built-in as standard, making it easy to connect the drive to a factory-wide SCADA system or an HMI touchscreen.
PC Software Link: Supports FRENIC Loader software via a USB adapter, allowing for easy parameter backup and mass configuration across multiple machines.