FVR2.2AS1S-4E - Fuji Micro 2.2 KW 440V

Price 15800.0 INR/ Number

Get a Price/Quote

MOQ : 1 Number

FVR2.2AS1S-4E - Fuji Micro 2.2 KW 440V Trade Information

Minimum Order Quantity
1 Number

Delivery Time
24 Hours

About FVR2.2AS1S-4E - Fuji Micro 2.2 KW 440V

The Fuji Electric FVR2.2AS1S-4E is the 2.2 kW (3.0 HP) model in the FVR-Micro series. This is typically the largest capacity available in the "Micro" frame, designed for 3-phase 440V industrial power.

Manufacturer:	Fuji Electric
Series:	FVR-Micro
Model:	FVR2.2AS1S-4E
Application:	pumps / fans / general purpose
Capacity, kW:	2.2
Current, :	5.5
Main power supply, V:	400
Phase:	3
Output frequency, Hz:	0,1-400
Enclosure:	IP20
Overload capacity, % per 1 min.:	150
EMC filter:	-
Braking unit:	+
Analog input:	2
Digital input:	6
Starting torque:	+
PID:	PID - control
Sensorless vector control:	+
Operation temperature, :	-10.....+50
Dimensions (W x H x D), mm:	108x128x139
Weight, kg:	1

Dimensions & Weight (Inches)

The 2.2kW model is slightly heavier than the smaller versions to account for a larger internal cooling fan and heat sink, but it maintains a similar footprint.

Measurement	Metric	Imperial (Inches/Lbs)
Width	108 mm	4.25 in
Height	128 mm	5.04 in
Depth (Length)	139 mm	5.47 in
Weight	1.1 kg	2.43 lbs

Key Application Differences

At 3.0 HP, this drive is often used for:

Small Industrial Mixers: High starting torque is essential here.
Exhaust Fans: Large diameter fans that require controlled acceleration (soft start) to prevent belt wear.
Reciprocating Pumps: The Sensorless Vector Control helps maintain torque when the pump hits high-pressure points in its cycle.

Note: For this 5.5A model, it is highly recommended to use at least 14 AWG (2.5mm) wiring for the power terminals to handle the continuous current safely.

The Fuji Electric FVR2.2AS1S-4E (2.2kW / 3.0 HP) provides the highest power output in the FVR-Micro range, delivering up to 5.5 Amps. It is designed to handle more demanding industrial loads while offering the same smart control features as the smaller units.

Primary Control Functions

High-Output Speed Control: Regulates motors up to 3 HP from 0.1 to 400 Hz. This allows for high-speed operation (e.g., for specialized spindles) or very slow, precise movement.
Dynamic Torque Vector Control: This is the "brain" of the drive. It calculates the motor's current status in real-time to provide maximum torque (over 150%) right from startup. This is essential for 3 HP loads that are hard to move, like loaded screw conveyors or crushers.
Automatic Energy Saving: For applications like fans and centrifugal pumps, the drive automatically lowers the voltage when the motor isn't under full load, significantly cutting electricity costs.

Operational Capabilities

Advanced PID Controller: Includes a "Sleep" and "Wake-up" function. For example, in a water pumping system, if the pressure is maintained and flow stops, the drive will go to sleep to save power and wake up automatically when pressure drops.
Soft Start/Stop: Prevents mechanical "shock" to your system. You can program the Acceleration and Deceleration times (up to 3,600 seconds) to ensure belts don't snap and pipes don't experience "water hammer."
8-Step Multi-Speed: Can be programmed to run at different speeds based on digital inputs from a PLC or limit switches.

Safety & Maintenance Functions

Electronic Thermal Protection: Specifically tuned for 2.2kW motors. It monitors the heat profile of the motor based on current draw and will trip the system before the motor windings are damaged.
Overvoltage Limitation: During braking, motors can act as generators and send power back to the drive. This function manages that "regen" energy to prevent the drive from tripping on an "OU" (Overvoltage) error.
Alarm Memory: It stores the specific conditions (current, voltage, frequency) at the exact moment a fault occurs, making troubleshooting a 3 HP system much faster.

Connection & Control

Local Control: Built-in potentiometer dial and Run/Stop buttons for immediate manual use.
Remote Control: Supports external 0-10V signals, 4-20mA signals, or RS-485 Modbus RTU for factory-wide automation.