FRN0005C2S-4A - Fuji Mini 1.5 KW 2 hp 440V

Name: FRN0005C2S-4A - Fuji Mini 1.5 KW 2 hp 440V
Brand: Corbital Enterprise
Price: 24100.0 INR
Availability: InStock

Price 24100.0 INR/ Number

Get a Price/Quote

MOQ : 1 Number

FRN0005C2S-4A - Fuji Mini 1.5 KW 2 hp 440V Specification

Mounting Type
Panel mounting

Humidity %
5% to 95%

IP Rating
20

Product Type
VFD

Power Rating
380 480

Application
Industrial Machinery

Color
Blue

Weight
1.7 Kilograms (kg)

Rated Voltage
380 480 Volt (V)

Usage & Applications
Industrial Machinery

Warranty
1 Year

Phase
3 Phase

Input Voltage
380 480 Volt (V)

Material
Plastic

Rated Current
380 480 Volt (v)

FRN0005C2S-4A - Fuji Mini 1.5 KW 2 hp 440V Trade Information

Minimum Order Quantity
1 Number

Delivery Time
24 Hours

About FRN0005C2S-4A - Fuji Mini 1.5 KW 2 hp 440V

The

Fuji Electric FRN0005C2S-4A

is a 1.5 kW (2.0 HP) variable frequency drive (VFD) from the FRENIC-Mini (C2) series. It provides a higher current rating compared to the 0.75kW models while remaining in a compact, panel-mount chassis.

Feature	Specification
Applicable Motor	1.5 kW (2.0 HP)
Rated Output Current	4.3 Amps
Input Voltage	3-Phase 380V to 480V AC
Overload Capacity	150% for 1 minute; 200% for 0.5 seconds
Control Method	Dynamic Torque Vector Control

Physical Dimensions & Weight

The FRN0005C2S-4A follows the standard compact sizing for the C2 series, making it easily interchangeable with other Mini drives.

The Fuji Electric FRN0005C2S-4A (FRENIC-Mini C2) is a high-performance compact drive engineered to control 1.5kW (2.0 HP) motors with a rated current of 4.3 Amps. It is significantly more advanced than basic micro-drives, offering superior torque and motor compatibility.

Primary Control Functions

Dynamic Torque Vector Control: This is the drive's standout feature. It calculates the optimal motor power in real-time, providing 200% starting torque at 0.5Hz. This ensures that heavy loads (like a 2 HP mixer or loaded conveyor) start smoothly without stalling.
Permanent Magnet (PM) Motor Control: Beyond standard induction motors, this drive can control high-efficiency Synchronous PM motors. This allows you to future-proof your setup for energy-saving motor technologies.
Braking Chopper Circuit: A dedicated internal braking circuit is built-in. This allows you to stop high-inertia rotating loads (like large fans) quickly by adding an external braking resistor without needing an extra drive module.

Operational Capabilities

Full PID Control: It can automatically regulate motor speed based on feedback from a sensor (like a pressure or flow sensor). It includes "Sleep" and "Wake-up" modes to save power during low-demand periods.
8-Step Speed & Pattern Operation: You can program the drive to cycle through different speeds or directions automatically based on timer settings or external triggers.
Energy Optimization: Even at partial loads, the drive adjusts the magnetic flux of the motor to ensure the lowest possible electricity consumption.
Overload "Ride-Through": If the system hits a sudden mechanical resistance, the drive can briefly boost current to "push" through the load rather than immediately tripping on a fault.

Safety & Maintenance

Component Life Diagnostics: The drive monitors its own internal parts. It can provide a warning signal when the cooling fan or internal capacitors are reaching the end of their service life (approx. 10 years).
Advanced Fault Logging: It records the exact conditions (Current, Voltage, Frequency) of the last several trips to help you identify if a problem is electrical or mechanical.
Stall Prevention: Automatically manages frequency during rapid acceleration or heavy load spikes to prevent the drive from tripping on overcurrent.

Interface & Networking

Built-in Potentiometer: A physical dial on the front allows for immediate, intuitive speed control.
RS-485 Modbus RTU: Built-in as standard, allowing the drive to be integrated into a larger factory network or controlled via a Touchscreen (HMI).
PC Connection: Supports FRENIC Loader software via a USB adapter, making it easy to copy parameters from one drive to another during mass installation.